KOYO – Rotary Encoders, PLC, HMI, Proximity Sensors


จำหน่าย PLC, HMI, Rotary Encoders, Proximity Sensors ยี่ห้อ KOYO จากประเทศญี่ปุ่น

KOYO ELECTRONICS INDUSTRIES CO., LTD.

Incremental Type

Product Index

IncrementalAbsoluteOptions
Very compact TRD-MX Series
TRD-S Series
TRD-2E Series
Compact TRD-N Series: slim-design type
TRD-J Series: multi-purpose type
Large TRD-GK Series: powerful shaft loads type
Hollow shaft TRD-SH Series: very compact type
TRD-NH Series: compact type


Product Lineup

PDF For product details, please download a PDF file.

TRD-MX Series

PDF
(14.8MB)
Very compact type
TRD-MX Series
A very small design with 25 mm diameter, 29 mm depth and 4mm shaft Compact design but the lineup reaches 1,024 P/R; line-driver output type available
Pulse/revolution: 100, 200, 360, 500, 512, 600, 1000 and 1,024
Source voltage: 5 to 24 V DC
Maximum allowable speed: 6000 rpm
Signal waveform: Two-phase + home position
Output type: NPN open collector output / line-driver
IP50 dust proof
Pagetop

TRD-S Series

PDF
(14.8MB)
Very compact type
TRD-S Series
Small body with 38 mm diameter and 30 mm depth
Compact design but the lineup reaches 2,500 P/R
Low-priced for lower system costs
Pagetop


TRD-2E Series

PDF
(14.7MB)
Very compact type
TRD-2E Series
Small body with 40 mm diameter and 36 mm depth
Protection against reverse connection and short circuit
Protection degree IP54 (dust and splash proof)
Pagetop

TRD-N Series

PDF
(15.1MB)
Compact type with a slim design
TRD-N Series
Compact body with 50 mm diameter and 35 mm depth
Protection selectable according to the operating environment
The IP65 dust and splash proofed with aluminum die-cast casing
Wide range of resolution from 1 to 2,500 P/R
A robust ƒモ8 mm aluminum shaft
Wide voltage ranging from 4.75 to 30 V DC
Servo mounting is available for easy home position adjustment.
Pagetop

TRD-J Series

PDF
(14.9MB)
Compact multi-purpose type
TRD-J Series
Long-lasting design of ƒモ8 mm shaft in ƒモ50 mm body
Durable metal slit plate to achieve 1000 P/R。
Wide voltage ranging from 4.75 to 30 V DC
Totem-pole output allows longer cable extension
Pagetop

TRD-GK Series

PDF
(14.8MB)
Large type supporting powerful shaft loads
TRD-GK Series
Tough spindle withstand large load (radial 100 N, thrust 50 N), durable bearing lasts for 1.2 x 1010 revolutions
Dust and splash proof
Totem-pole output allows longer cable extension
Servo mounting is available for easy home position adjustment.
Pagetop

TRD-SH Series

PDF
(14.8MB)
Very compact type with hollow shaft
TRD-SH Series
Small body with 38 mm diameter and 30 mm depth
Compact design but the lineup reaches 2,500 P/R
Low-priced for lower system costs
Pagetop

TRD-NH Series

PDF
(15.1MB)
Hollow shaft type
TRD-NH Series
Compact body with 50 mm diameter and 35 mm depth
Protection selectable according to the operating environment
IP65 dust and splash proofed with aluminum die-cast casing
Wide range of resolution from 1 to 2,500 P/R
A robust ƒモ8 mm aluminum shaft
Wide voltage ranging from 4.75 to 30 V DC
 Servo mounting is available for easy home position adjustment.

 

PLCs

PLCs Direct LOGIC PLC – an international brand from Japan

We independently developed the KOSTAC PLC, a workplace-oriented stage-type programmable controller, and are providing this easy-to-use product to customers around the world. An identical-concept SFC programming method is used in PLC IEC/JIS standards, testifying to the international recognition of its superiority. Now is truly the information age, and we are providing variety of open network solutions to the worldwide customer through our global brand “Direct Logic PLC”.


Product Lineup

PDF For details about the products, please refer to the downloadable PDF document.
It includes the features, major specifications, network connection diagrams, power consumption and layouts as well as descriptions on the modules.
AZ-C1 Series

PDF
(773KB)
AZ-C1 Series
Safety PLC based on universal standard

EN954-1 category 4
 IEC61508 SIL3
 ISO13849-1:2006 PLe
 CPU with built-in I/Os (8 in / 6 out)
 Maximum 16 expansion modules available
 Maximum 256 points I/Os
 16K words program memory
 Two types of operation mode (programless/free program)
 Combination program (safety control and general control) is available

DirectLOGIC 05

PDF
(2.61MB)
KOSTAC SJ Series
Small but powerful. Micro size high-performance PLC.
3 type CPUs (Standard, Analog and sound type)
Maximum 8 expansion modules available
CPU with built-in I/Os (14 points maximum)
Maximum 142 points I/Os
7.5K Words Program memory and 7.5 K Words Data memory
3 communucation ports available (2 ports at Standard type)
Includes 16 loop PID control

DirectLOGIC 05

PDF
(6.48MB)
DirectLOGIC 05
The DL05 series PLC offers with features you won’t find in most bricks – 6 I/O combinations of AC, DC and relay I/O, and advanced programming functions such as PID and drum sequencing.
8 inputs and 6 outputs
2K program memory
4K data memory
2 communication ports
129-instructions, including 4 PID loops
Removable terminal block
12/24VDC powered versions
Discrete and analog I/O option modules
Thermocouple and RTD temperature input modules.
1-channel high speed input/pulse output module(H0-CTRIO)
Memory cartridge/real-time clock option module
CUnet,DeviceNet™ slave,Ethernet,and Profibus option module

DirectLOGIC 06

PDF
(6.48MB)
DirectLOGIC 06
DL06 is our first micro PLC to combine its fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06, you can use the same PLC panel layout for all applications from 36 to 100 I/O.
20 inputs and 16 outputs
7.5K program memory
7.3K data memory
2 communication ports,including built-in RS232/RS422/RS485 port
229 instructions, including eight PID loops and ASCII
Removable terminal blocks
Built-in 3A 24VDC auxiliary power supply for field devices
12/24VDC powered versions
Built-in real-time clock/calendar
Discrete and analog I/O option modules
Thermocouple and RTD temperature input modules.
1-channel high speed input/pulse output module(H0-CTRIO)
Memory cartridge/real-time clock option module
CUnet,DeviceNet™ slave,Ethernet,and Profibus option module
Optional plug-in LCD display

DirectLOGIC 205

PDF
(2.88MB)
DirectLOGIC 205
If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you’ll find. Check out all our modules, bases and communication options.
AC/DC discrete input/output, up to 32 points per mobule
10 amp relay out
12-bit and 16-bit analog inputs and outputs
Temperature inputs(t/c and RTD)
Data communications, including CUnet,serial and Ethernet modules
Counter input/pulse output
Remote I/O master and slave
H2-CTRIO, 4-channel high speed counter/pulse output
H2-EBC, Ethernet slave base controller

DirectLOGIC 305

PDF
(386KB)
DirectLOGIC 305
The DL305 series is a small modular PLC that has been marketed by various name brand PLC manufacturers for over 20 years. This Koyo design revolutionized the small PLC market, and is still a good performer and a great value.
Three standard CPUs, including the D3-350 with PID control and two communication ports
5, 8 and 10 slot bases
110/220VAC or 24VDC power supply
AC, DC inputs
AC, DC, and relay outputs
8 or 12-bit analog input/output
Specialty modules include ASCII/BASIC module, high-speed counter, and communication interface module

DirectLOGIC 405

PDF
(2.65MB)
DirectLOGIC 405
The DL405 product line packs a lot of power for its size and price. It has the widest variety of I/O modules and configurations of all our PLCs.
AC/DC discrete input/output, up to 64 points per module
10 amp relay out
12-bit and 16-bit analog inputs and outputs
Thermocouple and RTD inputs
Data communications, including serial and Ethernet modules
Counter input
Remote I/O master and slave modules
Ethernet I/O master and slave modules
New high-speed counter module
16 PID loops built in, up to 96 with option modules

Terminator I/O Module

PDF
(365KB)
Terminator I/O Module
Terminator I/O provides you with an industrial I/O system with remote I/O, distributed I/O and digital I/O module capabilities. It combines the I/O points with their field terminations into a modular package to save panel space and money. With Terminator I/O, you can use distributed I/O nodes close to field devices for faster and more efficient wiring and troubleshooting.
Terminator I/O was custom-designed by Koyo (the same people who designed the original GE Series One PLC), a trusted name in control technology since 1983.
Network interface modules supporting Ethernet, Profibus, DeviceNET, MODBUS and Koyo remote I/O; some adapters include an on-board RS232 serial port.
Discrete and analog industrial I/O modules with modular terminal bases
Configuration flexibility by plugging together a network interface module with up to 16 I/O modules.
Use local expansion for large I/O drops. No more confining I/O bases.
AC or DC power supplies. For high power systems, combine multiple supplies on a single I/O set.
Horizontal or vertical DIN rail mounting

DirectSOFT 5

PDF
(938KB)
DirectSOFT 5
Our powerful Windows-based DirectSOFT programming package is new and improved. With many new instructions, programming is now easier, quicker and more intuitive than ever. Improved viewing options and customizable tool bars make it easier to program and monitor your PLC system.
With DirectSOFT5, documentation can be exported for use in other applications such as our ViewJetCmore operator interface panels. User Interface Themes allow operators to create a unique look and feel for the DirectSOFT programming environment. The dockable window feature allows relocation of Cross Reference and Data views. The ability to auto-hide or even tear away views and place them outside the DirectSOFT5 work space optimizes full ladder viewing.
The product offering has been simplified to a full support PC-DSOFT5 package that programs all of our DirectLogic PLCs, and our new PC-DS100 package, which is a full-featured FREE programming package with a 100 word limitation. (DS100 is only available by download from our Web site).”

Handheld Programmers

PDF
D4-HPP
(508KB)
PDF
DV-1000
(376KB)
Handheld Programmers
D2-HPP
D4-HPP
DirectView 1000 Text Panel

Handheld Programmers

PDF
(2.08MB)
ZIP LINK
Wiring Solutions Using the ZIPLink Wiring System. ZIPLinks eliminate the normally tedious process of wiring between devices by utilizing prewired cables and DIN rail mount connector modules. It’s as simple as plugging in a cable connector at either end or terminating wires at only one end.

Signal Conditioners

PDF
(1.72MB)
Signal Conditioners
Signal integrity starts with quality measurement and good equipment. However, even with the best equipment signals can be degraded if the equipment is not properly installed or is not protected by signal conditioners. Signal integrity can be greatly impacted by poor shielding and wiring practices. The biggest factor is ground loop errors (ground noise). Our signal conditioner products protect your expensive electronic equipment against ground loops with up to 1500 V of isolation.
Isolation is one way to eliminate ground loop errors caused by ground noise and other such problems. Isolation means using one of many electronic methods to interrupt the connections between two grounds while passing the correct signal with little or no loss of accuracy. Without a way for ground currents to flow, these currents can’t induce signal errors.

Pagetop

HMI (display and software)

HMI (display and software) Adaptable to many different uses

ViewJetCmore is our new line of programmable displays. ViewJetCmore has a great connectivity such as e-mail, Web Server and FTP Server/Client. Visual Scope HMI software for PCs that are now familiar to users.

Programmable Displays
KOYO programmable displays, the ViewJetCmore and the ViewJet GC Series, are connectable with most PLC models commercially available, including KOYO PLCs. Connections are simple. You have only to configure the bit device and Memory device of the PLC.
Software
The software serves to process the data on the PC connected with the PLC on the network. It supports not only KOYO PLCs but also PLCs of any make.

Pagetop

Proximity Sensors

Proximity Sensors A wide array of models available

KOYO supplies many different models of proximity sensors, including the cylindrical metal type, the cylindrical resin type, the rectangular type, the upper face sensing type and the front face sensing type, to support all environments and all purposes.

Inductive Proximity Sensors
Capacitive Proximity Sensors

Pagetop

Credit : http://www.koyoele.co.jp